-- SBC
-- Panel PC
-- Bare Bone System
-- Chassis
-- Power Supply
-- Backplane



BPW-8071
70W DC-DC Open Frame Power Supply
Input Range: 10~30VDC
Output 70W with 22FCM Fan Required




Large Image Download Center

 
 
Input Voltage:
10~30VDC with normal line at +24VDC
Input Frequency:
47~63Hz
Input Current:
13A for 10VDC max.
Inrush Current:
< 15A at 10VDC input from cold start excluding EMI capactiors
Load Range:
With all other outputs within their specified voltage accuracy ranges and 60% rated load conditions, the +5V output is between 5~5.1V. It could last 10 sec. at peak load and 25°C
Ripple And Noise:
Peak to peak ripple and noise for +5V is < 50mV, and < 100mV for the other
Line Reulation:
< +/-2% for each output at rated load and < +/-10% +12V and +24V input variables
Load Regulation:
< +/-1% for +5V, < +/-5% for +12V and -12V
Efficiency:
> 70% at nominal line and rated load
Altitude:
> 10,000 feet
Protection:
Built-in over voltage protection circuit. Trip point of crowbar circuit is between 5.7~7V hiccup mode against short circuit or over load conditions auto recovery when fault conditions are removed O.C.P. of +5V is 20A max.
Temperature:
0~+50°C (operating); -40~+85°C (storage)
Connectors:
DC Input: Terminal blocks
DC Output: Molex 5273-04A or equivalent device
For Fan Use Only: Molex 5045-02A or equivalent device
Safety:
UL 1950 / CSA 22.2 No.234 / VDE EN60950
EMI:
FCC class B / EN55022 B
EMS:
Level 3 of IEC-802, 803, 804
Dimensions:
12.7 x 7.62 x 3.86 cm at tolerance +/-0.4mm

PIN
Output
1~3
+5V
4~7
GND
7
+12V
8
-12V
Output Voltage
Min. Load
Rated Load
Max. Load
Voltage Accuracy
+5V
0A
10A
14A
5~5.1V
+12V
0A
1.5A
3A
11.3~12V
-12V
0A
0.3A
----
-10.8~-12V


Back


Copyright© BOSER Technology Co., Ltd. all rights reserved.
All specifications and photos are subject to change without notice.
All trademarks and brand names are the registered trademarks of their respective companies.