Input Voltage:
19~32VDC |
Input Current:
Max. 20A at 24VDC |
Inrush Current:
< 5A at 24VDC input, cold start at 25°C |
Ripple And Noise:
Peak to peak ripple and noise is < 50mV for +5V and +3.3V outputs, < 100mV for other outputs when output voltage is at rated load |
Line Regulation:
< +/-1% for each output measured at rated load and +19~+32V input voltage variables |
Load Regulation:
Output voltage load regulation is less than the value on the table when each output load changes rated loads from +/-40%~60%, with all other outputs at 60% rated load |
Output Power:
Total DC continuous power is within 300W at < 30°C ambient temperature and 24~32V input voltage; max. total combined output power on 3.3V and 5V rails is 150W |
Efficiency:
65% typical at nominal line and rated load |
Altitude:
10,000 feet |
Protection:
Input: Protection against wrong polarity when 24VDC input is inversely connected by mistake
Output: Built-in over voltage protection circuit. Trip point of crowbar circuit is between 5.9~7.0V. Hiccup mode against short circuit or over load conditions auto recovery when faulty conditions are removed |
Temperature:
0~+70°C (operating); -40~+75°C (storage) |
Connectors:
Input: Three positions terminal block
DC Output: Output provides one AT type P8/P9 and two disk drive connector
|
Safety:
UL 1950 / CSA 22.2 No.234 / VDE EN60950 |
EMI:
FCC class B / EN55022 B |
EMS:
Level 3 of IEC-801, 802, 803, 804 |
Dimensions:
14.0 x 15.0 x 8.62 cm with +/-0.8mm and +/-0.4mm tolerance between mounting holes |
MTBF:
116,858 hrs. |
|
