-- SBC
-- Panel PC
-- Bare Bone System
-- Chassis
-- Power Supply
-- Backplane

MPE-FD(T)40 Series
40W AC-DC Power Supply

Large Image Download Center

Total Output Power:
1) Line regulation is measuring from 100VAC to 240VAC with rated load
2) Load regulation is measuring from 60% to 100% full load from 60% to 20% full load (60% +/-40% full load)
3) The output at 60% rated load and input is nominal 110/220VAC
4) Measured by a 20MHz bandwidth limited oscilloscope and the each output is connected with a 10uF Electrolytic Capacitor and a 0.1uF Ceramic Capacitor
5) Measuring at nominal line and rated load
Input Specification:
Over Load Protection:
Fully protected against output overload and short circuit. Automatic recovery upon of overload condition
Over Voltage Protection:
3.6V~4.6V/5.7V~6.7V ON V1(3.5V/5V)
120%~140%              ON V2(12V/15V/24V)
Environment Specification:
10.16 x 5.08 x 3.04 cm, Tolerance +/-0.4mm


Copyright© BOSER Technology Co., Ltd. all rights reserved.
All specifications and photos are subject to change without notice.
All trademarks and brand names are the registered trademarks of their respective companies.