-- SBC
-- Panel PC
-- Bare Bone System
-- Chassis
-- Power Supply
-- Backplane



MPI-8080
80W AC-DC Open Frame Power Supply
Output 100W with Fan Required




Large Image Download Center

 
 
Input Voltage:
85~264VAC
Input Frequency:
47~63Hz
Input Current:
3A at 115VAC or 1.5A at 230VAC max. capacitors
Inrush Current:
Does not exceed 30A at 115VAC input or 60A at 230VAC input, at cold start 25°C
Load Regulation:
With +5V output set between 4.95~5.05V and all outputs 60% rated load, and all other outputs in the accuracy range, max. load can not > 80W convection clloing and > 100W forced air clloing
Ripple And Noise:
Peak to peak ripple and noise for each output is < 1% of each output voltage at rated load
Line Regulation:
< +/-1% at rated load with +/-10% change in input voltage
Load Regulation:
< +/-1% for +5V, < +/-5% for other outputs with +/-40% change in measured output loading from 60% rated load and other outputs at 60% rated load
Hold Up Time:
> 16ms at 115VAC input and rated load
Efficiency:
> 70% at nominal line and rated load
Altitude:
10,000 feet
Protection:
Short Circuit: Hiccup mode against short circuit or over load conditions auto recovery to normal after wrong conditions are remover
Output: Built-in crowbar circuit shuts down outputs to avoid damage. Trip point of over voltage protections is between 5.7~7.0V AC line ON/OFF restarts and recovers the unit from over voltage protection
Temperature:
0~+50°C requires forces air of 30CFM for outputs > 80W (operating); -20~+70°C (storage)
Humidity:
5~95%; non-condensing at 40°C (operating)
Safety:
UL 1950 / CSA 22.2 No.234 / VDE EN60950
EMI:
FCC class B / EN55022 B
EMS:
Level 3 of IEC-801, 802, 803, 804
Dimensions:
15.24 x 18.38 x 3.8 cm within +/-0.4mm
MTBF:
283,179 hrs.

PIN
Input
1
AC Line-1
2
AC Line-2
3
GND
PIN
Output
1~3
+5V
4~7
GND
8~9
+12V
10
-12V
11
-5V
12
N/C
Output Voltage
Min. Load
Rated Load
Max. Load
Tolerance
+5V
1A
6A
10A
+/-0.05V
+12V
0A
3.5A
6A
+/-0.75V
-12V
0A
0.5A
1A
+/-0.75V
-5V
0A
0.5A
1A
+/-0.25V


Back


Copyright© BOSER Technology Co., Ltd. all rights reserved.
All specifications and photos are subject to change without notice.
All trademarks and brand names are the registered trademarks of their respective companies.